Current location： Home >> Products >> Rheological Additive（organoclay）

TY-SD2

Content description:organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity

Sales Hotline:+8613750836416

Product Introduction

TY-SD2 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.

1. Advantages:

☆ High gelling efficiency over low to medium polarity organic liquids.

☆ Easy of incorporation. No need for polar activator or making pregel.

☆ Consistent in rheology and thixotropy development.

☆ Excellent sag resistance and viscosity control.

☆ Easy of dispersion.

☆ Can be added at any step,even can be used in post-addition to correct the final viscosity of a certain batch.

☆ Produce gel with light color and high transparency.

2. Typical Properties:

Color	Appearance	Density	Moisture (@105℃,2hrs)	Fineness through 200 mesh	Loss on Ignition ( @1000℃ )
White	Free Flowing Powder	1.65g/cm3	≤3.5%	≥98%	≤35%

3. Typical Applications:

●Acrylic paint	●Solvent epoxy paint
●Alkyd paint	●Wooden paint
●Anti-corrosion paint	●Adhesive
●Chlorinated rubber paint	●Inks(Mineral oil)
●Industrial paint	●Inks(Nitro)
●Non-solvent epoxy paint	●Lubricating grease
●Polyester paint	●Nitro lacquer
●Road paint	●Cosmetics
●Silica paint

4. Incorporations:

TY-SD2 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, TY-SD2 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.

5. Recommended Levels:

The amount of TY-SD2 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.

6. International Countertypes: Bentone^®SD-2, Claytone^®APA

Cases